UHU The All Purpose Modelling Adhesive 35ml

PROPERTIES

• liquid
• crystal-clear
• fast drying
• temporarily adjustable
• does not wrinkle paper

APPLICATION

SUITABLE FOR:

Universal - glues wood, wood based materials, plastics (ABS, hard and soft PVC, Plexiglas®, polystyrene, Resopal®), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics and much more.

HANDLING

BEFORE USE:

Working conditions

• Do not use at temperatures below +5°C.

Surface requirements

• Materials to be glued must be clean, dry and free of dust and grease.

Preliminary surface treatment

• When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.

DURING USE:

Directions for use

• Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together.

Points of attention

• Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.

AFTER USE:

Stains/residue

• Remove wet glue stains immediately. Dried glue residue and glue stains in clothing can be removed with acetone.

Storage conditions

Product should be stored in a dry, cool and frost free place.